TEMPERATURE PRODUCTS

General Instrument products are made with fine precision, latest automation, and by qualified professionals. They are tested and certified as per industry standards' organizations. Our products are pre-approved on most large company procurements world-wide.

Resistance Temperature Detector
 

Nickel Wire Mineral Insulated RTD

DETAILS

In continuation with its endeavour to provide products of best quality to clients, General has developed RTD with Nickel conductor in Mineral Insulated Construction for the first time in India.The basic difference between the conventional & Nickel conductor is material of conductor. In conventional, it is copper as against Nickel in newly developed MI. 

ADVANTAGES

• Most important advantage is that the RTD element is welded on to conductors and not brazed. As such
   same RTD can be used for much higher temperature of up to 6000C. In conventional RTD with copper
   conductor, brazing does not allow use of RTD above 4500C, after which brazing star ts softening and
   RTD loses its contact with cable conductors. In Nickel conductors, as Nickel can be welded, contact is
   much more stronger even at a higher temperature.

• Nickel conductor cables are annealed at higher temperature than that of Copper. The cable therefore
   is much more softer. Hence RTDs made with nickel conductor are more pliable and easier to use. 

• Nickel has much more strength than copper. Hence, they can be directly terminated in the terminal
   block avoiding another connection of flexible leads. RTDs with Nickel conductors give steady readings
   and chances of loose connection of flexible leads to copper wires is avoided.

• As Nickel conductors are welded to RTD element, it is a much more stable design than brazed RTD.
   This advantage is very important in applications where vibrations are present.

• Copper can get easily oxidised causing fluctuations in readings. Nickel being much more inert
   chemically, is not so prone to oxidation and hence gives stable readings over a longer period of time. 

TESTS

  • Calibration

  • Nitrogen leak test

  • Dimensional check

  • Insulation resistance (>100 M ohm @ 500VDC at 250C)

  • Continuity

 

  • Vibration test

  • Drop / Shock test

  • Self heating error test

  • Response time test (In situ-water flowing @ 20 ltr. Per second)

  • Autoclave test

  • Hot IR 

INDUSTRIES

Consultants,

Instruments Manufacturers,

Original Equipment Manufacturers,

Cement, Pharmaceutical,

Oil Exploration/Refineries/Petrochemicals Chemical Fertiliser Pulp & Paper Power Generation Metallurgy Synthetic Fiber 

CERTIFICATIONS
ATEX,GOST R,CE,BIS,CCOE,DGMS